The condenser of the ice making machine in your home

The condenser of the ice making machine is often a relative critical part and when you should buy a great ice machine with great property, we might better to understand its condenser working situation. There are generally three key strategies to realize the condensing process: the air cooled condenser, water cooled condenser and the evaporative condenser. In general, we do not propose the water cooled condenser and air cooled condenser as they are not really economic efficiency. Thus will certainly introduce the benefits and downsides of those above-mentioned two types within the flowing.


Water cooled condenser:The condensing temperature can be higher along with the wet bulb temperature and the wet bulb temperature is 5-7 degree higher than the environmental temperature.The tube ice making machine is usually widely used within our daily life. Its temperature limit is 20-55 degree hence the condition whether it is possible to adopt the water cooled condenser depends on the environmental wet bulb temperature.

Therefore the potential buyers have to supply the highest environmental wet bulb temperature before designing and at the same time, when the environmental temperature is higher than 50 degree, the cooling tower is going to be overbasked if you used the water cooled condenser. Subsequently, the cooling tower must have been used underneath the protection of the sunshade.


The working principle:

• The freezing medium air under high temperature and stress will enter into the shell side of the condenser through the inlet exactly where is definitely above the condenser.
• The cooling water pump will certainly extract the cooling water from the storage tank of the cooling tower, and also the water may go into the tube pass through inlet where is right below the condenser and finish the heat transfer with refrigerant outside of the copper pipe of the condenser.Application scopes of the ice making.
• The moment the water temperature becomes higher, it's going to come out from the outlet in which is right above the condenser then goes into the cooling tower inlet and the water enter into the sprinkler pipe and is sprinkled on the material equably.
• The water temperature is going to reduce after the heat transfer with the water in the material underneath the assist of the fan and the water going through the cooling process will probably be store in the tank for circulatory use.

The advantages of the water cooled condenser: the refrigeration efficency shall be improved because the condensing temperature of the refrigeration set is lower. The primeval expense is lower than air and evaporative cooling condenser and also the effects is much better.